AnyTone Flasher › Radios
AnyTone AT-D168UV firmware update
Flash official AnyTone AT-D168UV firmware from your browser over USB. No CPS and no Windows needed: desktop Chrome, Edge or Opera on Windows, macOS, Linux or ChromeOS.
Open the flasher for the AT-D168UV
How to update the AT-D168UV
- Connect the programming cable and switch the radio on normally. The flasher can save a codeplug backup first, because the update erases the codeplug.
- Start the radio in firmware-update mode. Switch the radio off, then hold PF1 + PF2 (the two keys below PTT) while switching it on. The red LED blinks.
- Pick the version and the serial port, then press Flash firmware and watch the progress.
- Run the installer on the radio. Switch the radio off, then hold PTT + PF1 while switching it on and confirm with the green menu key.
- Write your codeplug back with the CPS version that matches the new firmware.
Bundled AT-D168UV firmware versions
Official AnyTone releases, unmodified. Latest: V1.07 (2025-06-06).
| Version | Date | Size |
|---|---|---|
| V1.07 | 2025-06-06 | 915 KB |
| V1.06 | 2025-04-29 | 914 KB |
| V1.05 | 2025-01-23 | 913 KB |
| V1.04 | 2024-11-23 | 954 KB |
| V1.03 | 2024-11-16 | 954 KB |