AnyTone Flasher › Radios
AnyTone AT-D578UV / UV Pro firmware update
Flash official AnyTone AT-D578UV / UV Pro (mobile) firmware from your browser over USB. No CPS and no Windows needed: desktop Chrome, Edge or Opera on Windows, macOS, Linux or ChromeOS.
Open the flasher for the AT-D578UV / UV Pro
How to update the AT-D578UV / UV Pro
- Connect the programming cable and switch the radio on normally. The flasher can save a codeplug backup first, because the update erases the codeplug.
- Start the radio in firmware-update mode. With the radio on, hold MENU + EXIT and switch it off with the power key. Keep holding until the screen is off and the red LED blinks, then release.
- Pick the version and the serial port, then press Flash firmware and watch the progress.
- Run the installer on the radio. Switch the radio off, then hold P2 + the channel knob while switching it on and confirm the reset with MENU.
- Write your codeplug back with the CPS version that matches the new firmware.
Bundled AT-D578UV / UV Pro firmware versions
Official AnyTone releases, unmodified. Latest: V1.21 (2024-06-19).
| Version | Date | Builds | Size |
|---|---|---|---|
| V1.21 | 2024-06-19 | AT32 + GD32 | 1015 / 996 KB |
| V1.20 | 2024-01-30 | AT32 + GD32 | 1015 / 996 KB |
| V1.19.2 | 2023-09-23 | AT32 + GD32 | 1000 / 996 KB |
| V1.18 | 2023-04-21 | AT32 + GD32 | 996 / 998 KB |
| V1.17 | 2022-11-30 | AT32 + GD32 | 990 / 995 KB |
| V1.16 | 2022-07-05 | GD32 | 986 KB |
| V1.15 | 2021-11-29 | GD32 | 976 KB |
| V1.14 | 2021-05-27 | GD32 | 950 KB |
| V1.13 | 2021-04-12 | GD32 | 942 KB |
| V1.11 | 2020-09-17 | GD32 | 871 KB |
| V1.10N | 2020-09-08 | GD32 | 871 KB |
| V1.09N | 2020-06-12 | GD32 | 859 KB |
| V1.07 | 2020-04-25 | GD32 | 856 KB |
| V1.06 | 2020-01-16 | GD32 | 831 KB |
| V1.05 | 2019-12-25 | GD32 | 830 KB |