AnyTone Flasher › Radios
AnyTone AT-D878UV / UV Plus firmware update
Flash official AnyTone AT-D878UV / UV Plus firmware from your browser over USB. No CPS and no Windows needed: desktop Chrome, Edge or Opera on Windows, macOS, Linux or ChromeOS.
Open the flasher for the AT-D878UV / UV Plus
How to update the AT-D878UV / UV Plus
- Connect the programming cable and switch the radio on normally. The flasher can save a codeplug backup first, because the update erases the codeplug.
- Start the radio in firmware-update mode. Switch the radio off, then hold PF3 (blue key on top) + PTT while switching it on.
- Pick the version and the serial port, then press Flash firmware and watch the progress.
- Run the installer on the radio. Switch the radio off, then hold PF1 (side key next to PTT) + PTT while switching it on and confirm the reset on the radio.
- Write your codeplug back with the CPS version that matches the new firmware.
Bundled AT-D878UV / UV Plus firmware versions
Official AnyTone releases, unmodified. Latest: V4.00 (2025-07-25).
| Version | Date | Size |
|---|---|---|
| V4.00 | 2025-07-25 | 910 KB |
| V3.08N | 2025-06-10 | 917 KB |
| V3.06 | 2025-01-23 | 917 KB |
| V3.05 | 2024-12-10 | 914 KB |
| V3.04 | 2024-09-12 | 912 KB |
| V3.03 | 2023-12-18 | 902 KB |
| V3.02N | 2023-04-21 | 900 KB |
| V3.01 | 2022-11-03 | 894 KB |
| V3.00 | 2022-09-24 | 892 KB |
| V1.27 | 2022-04-08 | 889 KB |
| V1.26 | 2021-12-09 | 885 KB |
| V1.24N | 2021-05-26 | 872 KB |
| V1.23 | 2021-04-12 | 865 KB |
| V1.21 | 2020-09-17 | 839 KB |
| V1.20P | 2020-09-08 | 839 KB |
| V1.19 | 2020-06-16 | 817 KB |
| V1.18 | 2020-04-10 | 815 KB |
| V1.17 | 2020-01-16 | 809 KB |
| V1.16 | 2019-11-22 | 804 KB |
| V1.15 | 2019-09-26 | 800 KB |
| V1.13 | 2019-06-08 | 775 KB |
| V1.12 | 2019-04-18 | 768 KB |
| V1.11N | 2019-04-09 | 768 KB |
| V1.11 | 2019-03-22 | 768 KB |
| V1.10 | 2018-12-21 | 769 KB |
| V1.09 | 2018-11-22 | 760 KB |